Technical data (based on L model):
Container volume: 22m³
Compactor dimensions (LxWxH):6.480 x 2.500 x 2.600mm
Feed opening: 1.760 x 1.880mm
Filling opening: 1.450 x 1.880mm
Filling height without rollers: 1.520 mm
Compaction system: horizontal ram
Ram height: 600 mm
Ram stroke: 1.700 mm
Compaction force: 340 kN/34 to
Ram face pressure per m²: 300 kN/30 to
Penetration of ram: 450 mm
Hydraulic data:
Self-regulating hydraulic manifold block with differential circuit
Hydraulic tank: 60,0 l
Hydraulic pump: 14,5 cm³/min-1
Cycle time: 55 sec
Volume per stroke: 1,6 m³
Theoretical volume per hour: 105,0 m³
Electrical data:
Motor rating: 5,5 kW
Power connection: 5 x 6 mm² - CEE plug 32 Amp
Hydraulic Components:
Motor: Rosen/Lammers
Pump: Bosch-Rexroth
Valves: Bosch-Rexroth
Control block: Buschjost
Huge savings on transport with a high payload portable waste compactor
Our range of sealed portable compactors are high quality German built machines designed for sites with medium to large volumes of waste and recyclable materials but without sufficient floor space for larger compactors. These models are collected for disposal by both hooklift and skip lorries and typically hold 8 to 12 tonne of compacted waste.
The only difference between the L and the N model portable waste compactor is the size of the hopper. The L being large and the N being normal.
Using twin cross-over cylinders for a small footprint and offering an oversized infeed aperture, this model can be used to compact any kind of compactable materials, e.g. residual waste, moist waste, commercial waste, organic waste and oversized waste.
Available with a choice of eight integral container sizes between 14 and 28m3, the L & N portable compactor offers high performance, small footprint and low maintenance. Requiring no permanent fixings, this model can be sited on tarmac, block-paving, rough ground, etc.
The oscillating steel scrapers and maintenance free, fully guided press head reduce wear problems, waste build up and cleaning therefore reducing labour, breakdowns and repair costs.
As standard all L & N model portable compactors have 34 tonne compaction force, a very quiet running hydraulic pump, high quality steel compaction chamber floor, surface lacquered finish (including corrosion Protection Class C 3), continuously welded seams (which prevent corrosion) and are CE and GS approved. They are offered with a choice of side or top hung rear door and optional rubber seals to prevent leaks.
Our competitive pricing enables clients to invest in world class German manufactured machinery that is built to last a lifetime.
Standard scope of supply
- Front hook- Very quiet running hydraulic pump generating < 63 dB(A)
- Timer for regulating the operating time of the compactor
- Oil level and temperature control
- Pressure control gauge with stopcock
- Oscillating steel scrapers below the ram
- Rollers equipped with greasable bronze bushings
- Compaction chamber floor made of high quality steel S 355
- Ratchet locking mechanism on the discharge door
- Surface lacquered in corrosion Protection Class C 3
Portable Compactors
Saving tens of thousands of pounds per annum
